Description

A single wave of flame forms enters from the left edge of the iPhone 6 Plus/6s Plus's back panel and sweeps diagonally across the surface — Side Sweep Flames is a composition about directional energy and movement rather than a symmetric pattern, and the tempered glass back gives the orange and amber tones a refractive depth that flat polycarbonate can't produce. Sublimation printing locks the full tonal gradient of the flame forms into the glass permanently.

Side Sweep Flames iPhone 6 Plus/6s Plus Glass Case

The side-entry composition makes this design distinct from centred flame graphics. By entering from one edge and sweeping across the panel, the artwork creates a sense of motion that feels like a single dynamic moment rather than a repeating pattern. The iPhone 6 Plus/6s Plus's larger back surface gives the sweep plenty of room to develop fully, so the flame forms can elongate and taper properly rather than getting cropped at the edges. The warm orange palette is high-contrast against the phone's natural colours, which means the case reads clearly at arm's length without needing to be examined up close to appreciate the composition.

A flexible TPU bumper wraps the edges of the iPhone 6 Plus/6s Plus and absorbs corner impact. The glass back resists surface scratches from daily pocket carry. Precise cutouts align with the Lightning port, volume buttons, mute switch, headphone jack, and speaker grille. The raised camera bezel keeps the rear lens off flat surfaces when the phone rests face-up.

Made to order in India with a lifetime guarantee on the print. See more iPhone 6 Plus/6s Plus glass cases.

Side Sweep Flames iPhone 6 Plus/6s Plus Glass Case

    Product form

    A tempered glass back in a shock-absorbing TPU frame, with a waterproof, non-peeling print.

    ₹ 399.00  ₹ 299.00 Incl. GST

      Genuine
      100% authentic
      Secure payment
      UPI, cards, netbanking
      3-day replacement
      If it's defective or doesn't fit
      Free shipping
      On orders above ₹499
      Description

      A single wave of flame forms enters from the left edge of the iPhone 6 Plus/6s Plus's back panel and sweeps diagonally across the surface — Side Sweep Flames is a composition about directional energy and movement rather than a symmetric pattern, and the tempered glass back gives the orange and amber tones a refractive depth that flat polycarbonate can't produce. Sublimation printing locks the full tonal gradient of the flame forms into the glass permanently.

      Side Sweep Flames iPhone 6 Plus/6s Plus Glass Case

      The side-entry composition makes this design distinct from centred flame graphics. By entering from one edge and sweeping across the panel, the artwork creates a sense of motion that feels like a single dynamic moment rather than a repeating pattern. The iPhone 6 Plus/6s Plus's larger back surface gives the sweep plenty of room to develop fully, so the flame forms can elongate and taper properly rather than getting cropped at the edges. The warm orange palette is high-contrast against the phone's natural colours, which means the case reads clearly at arm's length without needing to be examined up close to appreciate the composition.

      A flexible TPU bumper wraps the edges of the iPhone 6 Plus/6s Plus and absorbs corner impact. The glass back resists surface scratches from daily pocket carry. Precise cutouts align with the Lightning port, volume buttons, mute switch, headphone jack, and speaker grille. The raised camera bezel keeps the rear lens off flat surfaces when the phone rests face-up.

      Made to order in India with a lifetime guarantee on the print. See more iPhone 6 Plus/6s Plus glass cases.

      Glass case

      Glossy glass back in a TPU frame

      A tempered glass back held in a soft TPU frame, for a shiny finish.

      • Lifetime print guaranteeCovers the print wearing off or peeling.
      • Shock-absorbing TPU frameThe soft frame around the edges takes the knock when your phone drops.
      • In the box1 printed glass case

      Made for your phone model

      • Buttons, charging port and speakers stay easy to use
      • Cut for the exact model you pick

      Photos are mockups. Printed colours and the camera cut-out can look slightly different in hand, because case batches vary.

      Specs

      Case typeTempered glass back with TPU frame
      PrintUV printed under the glass
      Print finishWaterproof, non-peeling
      FinishGlossy
      EdgesCovered by the TPU frame
      FitExact phone model
      Print guaranteeLifetime

      Frequently Asked Questions

      Everything you need to know before ordering your Casekaro phone case, from finding the right fit to delivery, payments and replacements.

      How do I make sure this case fits my phone?
      Pick your exact phone model and variant before adding to cart. Not sure which model you have? Find your exact phone model here. Every Casekaro case is printed to order for one specific model, and models with similar names often have different camera cut-outs and dimensions. Orders placed for the wrong model can't be returned or replaced.
      How long does delivery take, and is Cash on Delivery available?
      Your case is printed after you order, and most orders are delivered within 7 working days across India. Shipping is free on orders above ₹499. Cash on Delivery is not available. Please pay online with UPI, credit or debit card, or net banking. Tracking details are sent on WhatsApp and email once your order is dispatched.
      Can I cancel my order or change my delivery address?
      Yes, as long as your order hasn't been dispatched yet. You can cancel free of charge or change your delivery address by submitting a cancellation / address update request. Once an order is dispatched, it can't be cancelled and the address can't be changed. Your contact number can be updated at any time using the same form.
      What if my case arrives damaged or has a printing defect?
      Raise a request on our Return / Replace page within 3 days of delivery. You'll get a free replacement for a verified manufacturing defect (such as poor fit, print spots or major misalignment) or if you received the wrong product. Because every case is printed on demand, we can't accept returns for change of mind or a wrong model chosen at checkout.

      Login

      Forgot your password?

      Don't have an account yet?
      Create account